査読付き原著論文 (~2021)

33. Y. Arai*, M. Saito, A. Samizo, R. Inoue, K. Nishio, Y. Kogo, Hot-corrosion of refractory high-entropy ceramic matrix composites synthesized by alloy melt-infiltration, Ceram. Int., 47, 22 (2021) pp.31740-31748, https://doi.org/10.1016/j.ceramint.2021.08.055 (IF=5.532, Times cited: 6)

32. Y. Arai, T. Marumo, R. Inoue*, Use of Zr–Ti Alloy Melt Infiltration for Fabricating Carbon-Fiber-Reinforced Ultrahigh-Temperature Ceramic Matrix Composites, J. Compos. Sci., 5, 7 (2021) 186 (Times cited: 4) https://www.mdpi.com/2504-477X/5/7/186 Open access

31. Y. Arai, R. Inoue*, H. Kakisawa, Optical imaging of surface strain distribution up to 1500℃: Development of micro-speckle pattern, Int. J. Ceramic Eng. Sci., 3, 3 (2021) 140-149. https://doi.org/10.1002/ces2.10083 Open access

30. Y. Arai, H. Morigayama, T. Aoki, R. Inoue*, Environmental effects on degradation behavior in YbGdSi ternary system at elevated temperatures, Ceram. Int., 47, 13 (2021) 18783-18791. https://doi.org/10.1016/j.ceramint.2021.03.213 (IF=5.532, Time cited: 1)

29. Y. Arai*, Y. Daigo, E. Kojo, R. Inoue, Y. Kogo, Relationship between the microstructures and Young’s modulus of three-dimensional networked porous carbon material, J. Mater. Sci., 56 (2021) 10338-10352 (IF=4.682, Times cited: 9), https://link.springer.com/article/10.1007/s10853-021-05950-x

28. Y. Arai*, R Inoue*, H. Kakisawa, Anisotropic crack propagation behavior for the silicon-bond coat layer in a multilayer coated system, Int. J. Appl. Ceram. Technol., 18: 947-956. https://doi.org/10.1111/ijac.13679 (IF=2.328, Times cited: 3) Open access

27. Oxidation behavior of Ytterbium Silicide in Air, and Steam, T. Miyazaki, S. Usami, Y. Arai, T. Tsunoura, R. Inoue*, T. Aoki, R. Tamura, Y. Kogo, Intermetallics, 128, (2021) 106992, https://doi.org/10.1016/j.intermet.2020.106992 (IF=4.075, Times cited: 5)

26. Thermal Protection Performance of Polymethylmethacrylate-Impregnated Porous Carbon Materials with Three Different Densities, Yuki Kubota*, Kazuya Yoko, Toshiki Fujita, Ryo Inoue, Yasuo Kogo, J. Spacecr. Rockets., 2020 57:5, 985-994, https://doi.org/10.2514/1.A34619 (IF=1.282, Times cited: 3)

25. Enhanced evaporation of porous materials with micropores and high porosity, Noriyuki Unno*, Kazuhisa Yuki, Ryo Inoue, Yasuo Kogo, Jun Taniguchi, Shinichi Satake, Journal of Thermal Science and Technology, 15, 1 (2020) 1-9. https://doi.org/10.1299/jtst.2020jtst0007 (IF=0.686, Times cited:5) Open access

24. Phase stability of Yb-Gd-Si ternary alloys at elevated temperature, Hiroki Morigayama, Toshihisa Miyazaki, Sho Usami, Yutaro Arai, Toru Tsunoura, Ryo Inoue*, Takuya Aoki, Ryuji Tamura, Yasuo Kogo, J. Alloys Compd. 825, (2020) 154098. https://doi.org/10.1016/j.jallcom.2020.154098 (IF=6.371, Times cited: 7)

23. Yutaro Arai, Ryo Inoue*, Detection of small delamination in mullite/Si/SiC model EBC system by pulse thermography, J. Adv. Ceram. 8 (2019) 438–447. https://doi.org/10.1007/s40145-019-0327-3 (IF=7.917, Times cited: 21) Open access

22. Yutaro Arai, Ryo Inoue*, Ken Goto, Yasuo Kogo, Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review, Ceram. Int. 45 (2019) 14481–14489. https://doi.org/10.1016/j.ceramint.2019.05.065 (IF=5.532, Times cited: 112)

21. Yuki Kubota*, Yutaro Arai, Mamoru Yano, Ryo Inoue, Ken Goto, Yasuo Kogo, Oxidation and recession of plain weave carbon fiber reinforced ZrB2-SiC-ZrC in oxygen–hydrogen torch environment, J. Eur. Ceram. Soc. 39 (2019) 2812–2823. https://doi.org/10.1016/j.jeurceramsoc.2019.03.010 (IF=6.364, Times cited: 18)

20. Toshihisa Miyazaki, Sho Usami, Ryo Inoue*, Yasuo Kogo, Yutaro Arai, Oxidation behavior of ytterbium silicide, Ceram. Int. 45 (2019) 9560–9566. https://doi.org/10.1016/j.ceramint.2018.10.024 (IF=5.532, Times cited: 21)

19. Ryo Inoue*, Junki Nakano, Takashi Nakamura, Takuji Ube, Tsutomu Iida, Yasuo Kogo, Mechanical and thermoelectric properties of intragranular SiC- Nanoparticle/Mg₂Si composites, J. Alloys Compd. 775 (2019) 657–666. https://doi.org/10.1016/j.jallcom.2018.10.066 (IF=6.371, Times cited: 19)

18. Yuki Kubota*, Toshiki Fujita, Yusei Kaneda, Ryo Inoue, Yasuo Kogo, Thermal Protection Performance of Porous Carbon Ablators with Three Different Matrices, J. Spacecr. Rockets. 55 (2018) 1222–1229. https://doi.org/10.2514/1.A34234 (IF=1.282, Times cited: 13)

17. Ryo Inoue*, Yutaro Arai, Hideki Kakisawa, In situ observation and strain distribution measurements of atmospheric plasma-sprayed mullite and Si multilayered coatings on SiC substrates, J. Mater. Sci. 54 (2019) 2824–2835. https://doi.org/10.1007/s10853-018-3080-z (IF=4.682, Times cited: 12)

16. Yuki Kubota*, Yutaro Arai, Mamoru Yano, Ryo Inoue, Ken Goto, Yasuo Kogo, Oxidation and recession of plain weave carbon fiber reinforced ZrB2-SiC-ZrC in oxygen–hydrogen torch environment, J. Eur. Ceram. Soc. 39 (2019) 2812–2823. https://doi.org/10.1016/j.jeurceramsoc.2019.03.010 (IF=6.364, Times cited: 44)

15. Ryo Inoue*, Yutaro Arai, Yuki Kubota, Ken Goto, Yasuo Kogo, Development of short- and continuous carbon fiber-reinforced ZrB2-SiC-ZrC matrix composites for thermal protection systems, Ceram. Int. 44 (2018) 15859–15867. https://doi.org/10.1016/j.ceramint.2018.05.268 (IF=5.532, Times cited: 20)

14. Gil Yeroslavsky, Masao Kamimura, Ryo Inoue, Yasuo Kogo, Kohei Soga*, Visualization of Strain in Elastic Silicone Polymers Using Fluorescence Energy Transfer, J. Photopolym. Sci. Technol. 31 (2018) 533–540. https://doi.org/10.2494/photopolymer.31.533 (IF=0.934, Times cited: 6)

13. Ryo Inoue*, Yutaro Arai, Yuki Kubota, Yasuo Kogo, Ken Goto, Oxidation of ZrB2 and its composites: a review, J. Mater. Sci. (2018) 1–22. https://doi.org/10.1007/s10853-018-2601-0 (IF=4.682, Times cited: 56)

12. Ryo Inoue*, Yutaro Arai, Yuki Kubota, Ken Goto, Yasuo Kogo, Oxidation behavior of carbon fiber-dispersed ZrB2-SiC-ZrC triple phase matrix composites in an oxyhydrogen torch environment, Ceram. Int. 44 (2018) 8387–8396. https://doi.org/10.1016/j.ceramint.2018.02.031 (IF=5.532, Times cited: 18)

11. Ryo Inoue*, Yutaro Arai, Yuki Kubota, Yasuo Kogo, Ken Goto, Initial oxidation behaviors of ZrB2-SiC-ZrC ternary composites above 2000℃, J. Alloys Compd. 731 (2018) 310–317. https://doi.org/10.1016/j.jallcom.2017.10.034 (IF=6.371, Times cited: 50)

10. Ryo Inoue, Jenn Ming Yang, Hideki Kakisawa, Yutaka Kagawa*, Mixed-Mode Fracture Criterion of Short Carbon Fiber-Dispersed SiC Matrix Composite, J. Ceram. Sci. Tech. 8 (2017) 223–232. https://doi.org/10.4416/JCST2016-00108 (IF=1.220, Times cited: 17)

9. Ryo Inoue*, Yutaro Arai, Yuki Kubota, Oxidation behaviors of ZrB2–SiC binary composites above 2000 °C, Ceram. Int. 43 (2017) 8081–8088. https://doi.org/10.1016/j.ceramint.2017.03.129 (IF=5.532, Times cited: 45)

8. Takashi Niuchi, Jun Koyanagi*, Ryo Inoue, Yasuo Kogo, Molecular dynamics study of the interfacial strength between carbon fiber and phenolic resin, Adv. Comp. Mat. 26 (2017) 569–581. https://doi.org/10.1080/09243046.2017.1286543 (IF=2.870, Times cited: 29)

7. Yuki Kubota*, Hiroki Tanaka, Yutaro Arai, Ryo Inoue, Yasuo Kogo, Ken Goto, Oxidation behavior of ZrB2-SiC-ZrC at 1700°C, J. Eur. Ceram. Soc. 37 (2017) 1187–1194. https://doi.org/10.1016/j.jeurceramsoc.2016.10.034 (IF=6.364, Times cited: 62)

6. Yutaro Arai, Ryo Inoue*, Hiroki Tanaka, Yasuo Kogo, Ken Goto, In-situ observation of oxidation behavior in ZrB2-SiC-ZrC ternary composites up to 1500℃ using high-temperature observation system, J. Ceram. Soc. Jpn. 124 (2016) 890–897. https://doi.org/10.2109/jcersj2.16043 (IF=1.217, Times cited: 21)

5. Takashi Niuchi, Jun Koyanagi*, Ryo Inoue, Yasuo Kogo, A Molecular Dynamics for the Interfacial Strength between Carbon Fiber and Phenolic Resin, Journal of the Japan Society for Composite Materials. 42 (2016) 59–66. (in Japanese) https://doi.org/10.6089/jscm.42.59

4. Jun Koyanagi*, Kenichi Hirai, Aki Nakazato, Ryo Inoue, T. Ube, Estimation of the Highest Surface Temperature for CFRP Ablator by Raman Analysis, Trans. Jpn. Soc. Aero. Space Sci. 59 (2016) 364–370. https://doi.org/10.2322/tjsass.59.364 (IF=0.437, Times cited: 2)

3. Ryo Inoue, Hideki Kakisawa*, Taro Sumitomo, Yutaka Kagawa, Quantitative evaluation of toughening mechanisms in abalone nacre, J. Ceram. Soc. Jpn. 121 (2013) 258–260. https://doi.org/10.2109/jcersj2.121.258 (IF=1.217)

2. Ryo Inoue, Jenn-Ming Yang, Hideki Kakisawa, Yutaka Kagawa*, Mode I fracture toughness of short carbon fiber-dispersed SiC matrix composite fabricated by melt infiltration process, Ceram. Int. 39 (2013) 8341–8346. https://doi.org/10.1016/j.ceramint.2013.04.014 (IF=5.532, Times cited: 32)

1. Hideki Kakisawa*, Taro Sumitomo, Ryo Inoue, Yutaka Kagawa, Fabrication of nature-inspired bulk laminar composites by a powder processing, Comp. Sci. Tech. 70 (2010) 161–166. https://doi.org/10.1016/j.compscitech.2009.10.003 (IF=9.879, Times cited: 30)

国際会議プロシーディングス(査読有り) (~2019)

6. H. Wei, R Inoue, A. Aimi, K. Fujimoto, K. Nishio*, Thermal expansion coefficient controlled Cu-ZrW2-xMoxO8 cermet material prepared using spark plasma sintering method, Ceramic Engineering and Science Proceedings. No. 2, pp233-240, Wiley-American Ceramic Society, 2019.

5. Y. Kaneda, Ryo Inoue*, Y. Kogo, Fabrication procedure for porous carbon material with three dimensionally networked structure, Ceramic Engineering and Science Proceedings. No. 3, pp77-86, Wiley-American Ceramic Society, 2019.

4. R. Inoue*, G. Li, E. Kojo, M. Nakajima, Y. Kubota, Y. Kogo, (2018). Experimental Investigation and Analysis of Mechanical Properties of Three‐Dimensionally Networked Porous Carbon Material. In Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology (eds D. Singh, M. Fukushima, Y. Kim, K. Shimamura, N. Imanaka, T. Ohji, J. Amoroso and M. Lanagan). doi:10.1002/9781119494096.ch8

3. Takashi Nakamura, Ryo Inoue*, Syuhei Hasegawa, Yasuo Kogo, Tsutomu Iida, (2017). Mechanical Properties and Fracture Behavior of Mg2Si after Heat Exposure. MRS Advances, 2(54), 3291-3297

2. Ryo Inoue*, Kazuma Chikamoto, Yauso Kogo, Hideki Kakisawa, Effect of Heat Exposure on the Microstructures and Mechanical Properties of 3Al2O3·2SiO2/Si/SiC Coating System, in: Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development; Ceramic Transactions, Volume CCLXIII, John Wiley & Sons, Inc, Hoboken, NJ, USA, 2017: pp. 443–450. doi:10.1002/9781119407270.ch41.

1. Ryo Inoue, Hideki Kakisawa, Yutaka Kagawa*, Fracture Criterion of Short Carbon Fiber-Dispersed SiC Matrix Composite Under Mixed Mode Loading Condition, in: Design, Development, and Applications of Structural Ceramics, Composites, and Nanomaterials, John Wiley & Sons, Inc, Hoboken, NJ, USA, 2014: pp. 53–60. doi:10.1002/9781118889770.ch5.

著書 (~2019)

2. 軽量ハイブリッドセラミックス材料の開発、香川　豊、西岡　潔、井上遼、自動車の軽量化テクノロジー～材料・成形・接合・強度、燃費・電費性能の向上を目指して～、査読なし(2014)

1. 山添　正裕, 井上遼、垣澤　英樹、香川　豊、日本機械学會誌,貝殻の構造を模擬したコーティング材料 : 熱エネルギー制御への展開(<小特集>生物に学ぶ機械工学〜持続可能な社会を拓くバイオミメティクス〜), 117, 90-93 (2014).